EN 1092-1 Flange Dimensions (PN6–PN40)
Connecting dimensions for EN 1092-1 flanges from DN15 to DN300, for pressure ratings PN6, PN10, PN16, PN25 and PN40: outside diameter, bolt circle, number of bolt holes, hole diameter and bolt size. Pick a PN rating to see its table.
PN
| DN | Outside diameter D (mm) | Bolt circle K (mm) | Holes n | Hole diameter (mm) | Bolt size |
|---|---|---|---|---|---|
| 15 | 95 | 65 | 4 | 14 | M12 |
| 20 | 105 | 75 | 4 | 14 | M12 |
| 25 | 115 | 85 | 4 | 14 | M12 |
| 32 | 140 | 100 | 4 | 18 | M16 |
| 40 | 150 | 110 | 4 | 18 | M16 |
| 50 | 165 | 125 | 4 | 18 | M16 |
| 65 | 185 | 145 | 8 (or 4) | 18 | M16 |
| 80 | 200 | 160 | 8 | 18 | M16 |
| 100 | 220 | 180 | 8 | 18 | M16 |
| 125 | 250 | 210 | 8 | 18 | M16 |
| 150 | 285 | 240 | 8 | 22 | M20 |
| 200 | 340 | 295 | 12 | 22 | M20 |
| 250 | 405 | 355 | 12 | 26 | M24 |
| 300 | 460 | 410 | 12 | 26 | M24 |
Showing 14 rows for PN16. All dimensions in millimetres. DN65 PN10/PN16 is also commonly supplied with 4 holes — check the actual flange.
Downloads the PN16 table as a CSV file.
Notes
- PN6 DN65 is 4 holes, while PN10/PN16 DN65 is 8 holes. This is the one place where PN6 breaks the pattern of the higher ratings, so double-check the hole count before ordering a DN65 PN6 flange.
- PN10 and PN16 are identical for DN15–DN150, and so are PN25 and PN40. The ratings only start to differ at DN200, where the higher rating uses a larger flange and more or larger bolts. Below DN200, a PN10 flange and a PN16 flange of the same DN will bolt together — but their pressure-temperature ratings are still different, so that does not make them interchangeable in service.
- DN65 PN10/PN16 is also commonly supplied with 4 holes. The standard lists 8, but 4-hole versions are widespread in the market; the table flags this, and you should confirm the hole count on the actual flange.
- Connecting dimensions only. This table covers the dimensions that decide whether two flanges bolt together. It does not include flange thickness, facing type, or pressure-temperature ratings — check those in EN 1092-1 and the manufacturer’s data before purchase or installation.
Data source
- Zickwolff, "Flange dimensions PN 6 to PN 40 to EN 1092-1".
- Wermac.org, EN 1092-1 flange dimension pages (PN10 / PN16 / PN25 / PN40).
- Project Materials, EN 1092-1 plate flange sizes.
Data checked 2026-11-18. The PN6 table was cross-checked at both ends (DN15 and DN300) against Project Materials, piping-world and eathu.
Related pages
- Flange compatibility checker — check whether an EN 1092-1 flange and an ASME B16.5 flange will bolt together.
- PN to Class conversion — the nominal correspondence between PN ratings and ASME Classes.
For preliminary estimates only. Verify against manufacturer data and the governing standard before purchase or installation.